PC Electronics Plus 3/PC Electronics Plus 3.iso/pads/pcbmenu.dat

Text File | 1993-07-23 | 32KB | 1,612 lines

*
*   "pk2menu.dat"   p2000 menu data
*
*   HISTORY
*
*     4/30/92  ps   initial code
*     5/22/92  wfn  added debug menu for auto router
*     6/04/92  dw   added Net Attr menu
*     6/04/92  wfn  updated menus for auto router
*     6/10/92  wfn  updated menus for auto router
*     6/29/92  wfn  updated toggles and strings for auto router
*     6/29/92  vit  added SR2 menus,strings,toggles
*     7/09/92  wfn  updated sweep direction toggle
*     8/03/92  mwg  updated menus for consistency
*     8/19/92  vit  added new items in Route-Modify-Move_Seg menu
*     8/27/92  dw   added "Working" message!
*     9/03/92  dw   changed Ascii Out menu.
*     9/04/92  vit  changed EDC menu.
*     9/09/92  dw   changed Setup-Pads menu.
*     9/10/92  vit  added Thermal directions toggle, changed EDC menu.
*     9/17/92  vit  added SR2 strings.
*     10/12/92 dw   Fix forms & cam menus for PgUp & PgDn.
*     10/19/92 mam  added pair-layer setup to Setup Routing
*     10/21/92 vit  changed SR #88 menu
*     10/22/92 wfn  added new auto/strat/pass menu and change menu text
*     10/26/92 jjs  plot menu: re-adjusted this menu sequence, add page up/down items
*     10/28/92 ste  added TM item in EDC checking (Stepanov)
*     10/30/92 vit  MENU 0: integrated EDC changes
*     11/02/92 dw   Change Route:UnRoute,Width,Length menu button order to Route/Seg/Net
*     11/02/92 dw   Add separate menu for Setup/Lib-Path.
*     11/05/92 vit  Menu 60:Replaced End with Complete,91: RutSpeed - RipSpeed
*     11/23/92 ste  added save_IV, read_IV, edit_IV items in TM menu
*     11/27/92 ste  added M_delIV, M_newIV, M_addIVc, M_delIVc, M_movIVc
*     12/07/92 svb  added M_SELECT, M_KEYBRD
*     01/12/93 vit  Menu 82:Modify
*     02/03/93 ste  aggressor toggle modified
*     02/09/93 vit  integrated TM and EDC changes
*     02/10/93 vit  Fixed EDC forms menus for PgUp & PgDn.
*     04/30/93 vit  Replaced SR menu 88.
*     05/03/93    erj  Added CAM Prnters menu, changed CAM main menu.
*        05/21/93    erj  Added CAM Verify menu.
*        6/3/93    mhb    changed some route/auto and superroute stuff
*        6/25/93    vit    menu 8:extended "  Auto" string
*        7/23/93    mhb    added menu 103
*
SECTION MENU

**Generic menu items*
MENU   0
ITEM   0 "  Yes   "
ITEM   1 " Accept "
ITEM   2 " Start  "
ITEM   3 " Select "
ITEM   4 "Complete"
ITEM   5 "KeyBoard"
ITEM   6 "Page Up "
ITEM   7 "PageDown"
ITEM   8 "Add Item"
ITEM   9 "Del Item"
ITEM  10 " Window "
ITEM  11 " Expand "
ITEM  12 "Contract"
ITEM  13 "  Add   "
ITEM  14 " Delete "
ITEM  15 "Palette "
ITEM  16 "   No   "
ITEM  17 " Abort  "
ITEM  18 "  Exit  "
ITEM  19 " Cancel "
ITEM  20 " Apply  "
ITEM  21 " Revert "
ITEM  22 "  Save  "
ITEM  23 "Default "
ITEM  24 "Confirm "
ITEM  25 "Dispers "


**PADS2000 Top Menu*
MENU   1
ITEM   0 " In/Out "
ITEM   1 " Setup  "
ITEM   2 " Create "
ITEM   3 " Place  "
ITEM   4 " Route  "
ITEM   5 " Check  "
ITEM   6 "  ECO   "
ITEM   7 "Reports "
ITEM   8 "  CAM   "
ITEM   9 "  Exit  "

**POWERROUT Top Menu*
MENU   2
ITEM   0 " Job In "
ITEM   1 "Job Out "
ITEM   2 " Setup  "
ITEM   3 "AsciiOut"
ITEM   4 " Route  "
ITEM   5 "  Exit  "

**SUPERROUTER Top Menu*
MENU   3
ITEM   0 " Job In "
ITEM   1 "Job Out "
ITEM   2 " Setup  "
ITEM   3 " Route  "
ITEM   4 "  Exit  "

**In/Out*
MENU   4
ITEM   0 " Job In "
ITEM   1 "Job Out "
ITEM   2 "Ascii In"
ITEM   3 "AsciiOut"
ITEM   4 "IntrFace"
ITEM   5 "OnTheFly"
ITEM   6 "EraseJob"
ITEM   7 "  Exit  "

**Setup*
MENU   5
ITEM   0 "Display "
ITEM   1 "  Pads  "
ITEM   2 " Sizes  "
ITEM   3 "Paramtrs"
ITEM   4 "Net Attr"
ITEM   5 " Macros "
ITEM   6 "Routing "
ITEM   7 "Lib Path"
ITEM   8 " Origin "
ITEM   9 "SuprRout"
ITEM  10 "Strategy"
ITEM  11 "Read Wid"
ITEM  12 "  Exit  "

**Create*
MENU   6
ITEM   0 "  Text  "
ITEM   1 " Board  "
ITEM   2 " Copper "
ITEM   3 "2D Lines"
ITEM   4 "PrtDecal"
ITEM   5 "Cop Pour"
ITEM   6 "Cut Out "
ITEM   7 "Library "
ITEM   8 "PartType"
ITEM   9 "  Exit  "

**Place*
MENU   7
ITEM   0 "  Move  "
ITEM   1 "Mat Move"
ITEM   2 " Rotate "
ITEM   3 "Opposite"
ITEM   4 "  Glue  "
ITEM   5 " Unglue "
ITEM   6 "MoveName"
ITEM   7 "  Auto  "
ITEM   8 " Group  "
ITEM   9 "  Exit  "

**Route*
MENU   8
ITEM   0 "RoutConn"
ITEM   1 "  Auto  "
ITEM   2 "  Copy  "
ITEM   3 "Auto Adv"
ITEM   4 " Modify "
ITEM   5 "Sel Tear"
ITEM   6 "UnRoute "
ITEM   7 " Length "
ITEM   8 "  Exit  "

**Check*
MENU   9
ITEM   0 "Spacing "
ITEM   1 " Ascii  "
ITEM   2 "Futurnet"
ITEM   3 " Schema "
ITEM   4 "PlaneNet"
ITEM   5 "Cntnuity"
ITEM   6 "DrltoDrl"
ITEM   7 "  EDC   "
ITEM   8 " Erase  "
ITEM   9 "  Exit  "

**ECO*
MENU  10
ITEM   0 " To Sch "
ITEM   1 "From Sch"
ITEM   2 "  Exit  "

**Reports*
MENU  11
ITEM   0 "Net List"
ITEM   1 " Unused "
ITEM   2 " Stats  "
ITEM   3 " Limits "
ITEM   4 "PrtList1"
ITEM   5 "PrtList2"
ITEM   6 "Err List"
ITEM   7 "  Exit  "

**CAM*
MENU  12
ITEM   0 "PhotoPlt"
ITEM   1 "Pen Plot"
ITEM   2 "Printers"
ITEM   3 "        "
ITEM   4 " Drill  "
ITEM   5 " Batch  "
ITEM   6 "Defaults"
ITEM   7 " Verify "
ITEM   8 "Devices "
ITEM   9 "  Exit  "

**In/Out**AsciiOut*
MENU  13
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "   OK   "
ITEM   4 " Cancel "

**In/Out**OnTheFly*
MENU  14
ITEM   0 "Add Conn"
ITEM   1 "Del Conn"
ITEM   2 "Ren Net "
ITEM   3 "Disconn "
ITEM   4 "Add Part"
ITEM   5 "Del Part"
ITEM   6 "Ren Part"
ITEM   7 "Chg Part"
ITEM   8 "ModRoute"
ITEM   9 "AddRoute"
ITEM  10 "  Exit  "

**In/Out**OnTheFly*Add_Conn**
MENU  15

ITEM   0 " Select "
ITEM   1 "KeyBoard"
ITEM   2 "  Undo  "
ITEM   3 "Ren Net "
ITEM   4 " Window "
ITEM   5 " Expand "
ITEM   6 "Contract"
ITEM   7 "  Exit  "

**In/Out**OnTheFly*Add_Part*
MENU  16
ITEM   0 "Complete"
ITEM   1 " Rotate "
ITEM   2 "Opposite"
ITEM   3 "Ren Part"
ITEM   4 "AltDecal"
ITEM   5 "Mat Move"
ITEM   6 "  Exit  "

**In/Out**OnTheFly*Add_Rut*
MENU  17
ITEM   0 "Add Crn "
ITEM   1 "Del Crn "
ITEM   2 " Angle  "
ITEM   3 " Level  "
ITEM   4 "Add Arc "
ITEM   5 "Ren Net "
ITEM   6 "Complete"
ITEM   7 "  Exit  "

**eco**to sch**chg part**
MENU  18
ITEM   0 "One Part"
ITEM   1 "AllParts"
ITEM   2 "  Exit  "

**Setup**Pads*
MENU  19
ITEM   0 " Select "
ITEM   1 "Std Via "
ITEM   2 "Bur Via "
ITEM   3 "MicroVia"
ITEM   4 "List All"
ITEM   5 "  Exit  "

**Setup**Pads*Pad Stacks*
MENU  20
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Add Pin "
ITEM   4 "Del Pin "
ITEM   5 "Add Lvl "
ITEM   6 "Del Lvl "
ITEM   7 "Complete"
ITEM   8 "  Exit  "

**Setup**Pads**Part*
MENU  21
ITEM   0 " Select "
ITEM   1 "AllParts"
ITEM   2 "  Exit  "

**Setup**Macros*
MENU  22
ITEM   0 " Status "
ITEM   1 "  Load  "
ITEM   2 "  Save  "
ITEM   3 " Delete "
ITEM   4 "  Exit  "

**Setup**Routing*
MENU  23
ITEM   0 " Mitres "
ITEM   1 "SuprRout"
ITEM   2 "Pair_Lay"
ITEM   3 "  Exit  "

**Create**Text*
MENU  24
ITEM   0 " Create "
ITEM   1 "  Copy  "
ITEM   2 " Modify "
ITEM   3 " Delete "
ITEM   4 "Mir Conv"
ITEM   5 "  Exit  "

**Create**Text**create modify copy*
MENU  25
ITEM   0 "Complete"
ITEM   1 " Rotate "
ITEM   2 "EditText"
ITEM   3 " Mirror "
ITEM   4 " Window "
ITEM   5 " Expand "
ITEM   6 "Contract"
ITEM   7 " Level  "
ITEM   8 "  Size  "
ITEM   9 "  Exit  "

**Create**Text**create modify copy**rotate*
MENU  26
ITEM   0 "Rotate90"
ITEM   1 "SetAngle"
ITEM   2 "  Spin  "
ITEM   3 "  Exit  "

**Create**PrtDecal*
MENU  27
ITEM   0 " Create "
ITEM   1 " Modify "
ITEM   2 "  Exit  "

**Create**Library*
MENU  28
ITEM   0 " Select "
ITEM   1 "Initial "
ITEM   2 "  Exit  "

**Create**Library**initlib*
MENU  29
ITEM   0 "PartType"
ITEM   1 "PCBDecal"
ITEM   2 "CAEDecal"
ITEM   3 "2D Lines"
ITEM   4 "  Exit  "

**Create**Library**initlib**PartType*
MENU  30
ITEM   0 "  List  "
ITEM   1 " Delete "
ITEM   2 "  Read  "
ITEM   3 " Write  "
ITEM   4 "  Exit  "

**Create**PartType*
MENU  31
ITEM   0 "New Part"
ITEM   1 "New Conn"
ITEM   2 " Modify "
ITEM   3 " Merge  "
ITEM   4 "  Exit  "

**Create**PartType**edit*
MENU  32
ITEM   0 "PartInfo"
ITEM   1 "GateInfo"
ITEM   2 "  Save  "
ITEM   3 "  Exit  "

**Create**drawing item*
MENU  33
ITEM   0 "New Poly"
ITEM   1 "New Cir "
ITEM   2 "From Lib"
ITEM   3 " Origin "
ITEM   4 "  Copy  "
ITEM   5 " Modify "
ITEM   6 "  Move  "
ITEM   7 " Delete "
ITEM   8 " To Lib "
ITEM   9 "Combine "
ITEM  10 "  Grow  "
ITEM  11 " Hatch  "
ITEM  12 " Flood  "
ITEM  13 "  Exit  "

**Create**item**New_Poly New_Cir*
MENU  34
ITEM   0 "Add Crn "
ITEM   1 "Del Crn "
ITEM   2 " Angle  "
ITEM   3 " Width  "
ITEM   4 " Level  "
ITEM   5 " Window "
ITEM   6 " Expand "
ITEM   7 "Contract"
ITEM   8 "  End   "
ITEM   9 "Complete"
ITEM  10 "  Exit  "

**Create**item**Copy Move*
MENU  35
ITEM   0 "Complete"
ITEM   1 "Rotate90"
ITEM   2 "SetAngle"
ITEM   3 "  Spin  "
ITEM   4 " Window "
ITEM   5 " Expand "
ITEM   6 "Contract"
ITEM   7 "  Exit  "

**Create**item*Modify*
MENU  36
ITEM   0 "Move Crn"
ITEM   1 "Move Seg"
ITEM   2 "Cut Seg "
ITEM   3 "Add Crn "
ITEM   4 "Move Arc"
ITEM   5 "AssocCop"
ITEM   6 "Del Crn "
ITEM   7 " Width  "
ITEM   8 " Level  "
ITEM   9 "Net Name"
ITEM  10 "  Exit  "

**Create**item*Combine*
MENU  37
ITEM   0 "Add Item"
ITEM   1 "Del Item"
ITEM   2 "  Exit  "

**Create**part decal**create*
MENU  38
ITEM   0 "Outline "
ITEM   1 "MoveName"
ITEM   2 "Terminal"
ITEM   3 " Setup  "
ITEM   4 "  Save  "
ITEM   5 "  Exit  "

**Create**part decal**create**terminal*
MENU  39
ITEM   0 "  Add   "
ITEM   1 "  Move  "
ITEM   2 "MovePNum"
ITEM   3 "PadStack"
ITEM   4 " Delete "
ITEM   5 "  Exit  "

**Create**part decal**outline**copper**origin & pin_num*
MENU  40
ITEM   0 " Origin "
ITEM   1 "Terminal"
ITEM   2 " Copper "
ITEM   3 "  Exit  "

**Create**part decal**setup*
MENU  41
ITEM   0 "Display "
ITEM   1 " Origin "
ITEM   2 "Dot grid"
ITEM   3 "MaxLayer"
ITEM   4 " Units  "
ITEM   5 " Macros "
ITEM   6 "  Exit  "

**Create**item**modify**mov_crn, cut_seg etc.*
MENU  42
ITEM   0 "Complete"
ITEM   1 " Angle  "
ITEM   2 "Swap Crn"
ITEM   3 " Window "
ITEM   4 " Expand "
ITEM   5 "Contract"
ITEM   6 "  Exit  "

**Create**coppour**hatch*
MENU  43
ITEM   0 " Select "
ITEM   1 "HatchAll"
ITEM   2 "Fast Hat"
ITEM   3 "FloodAll"
ITEM   4 "Fast Fld"
ITEM   5 "Paramtrs"
ITEM   6 "  Exit  "

**Place**Move**
MENU  44
ITEM   0 "Overlap "
ITEM   1 "Rotate90"
ITEM   2 "Opposite"
ITEM   3 "Len Min "
ITEM   4 "AltDecal"
ITEM   5 "SetAngle"
ITEM   6 "  Spin  "
ITEM   7 " Nudge  "
ITEM   8 " Abort  "
ITEM   9 "  Exit  "

**Place**Move**Nudge*
MENU  45
ITEM   0 "Default "
ITEM   1 "  Left  "
ITEM   2 " Right  "
ITEM   3 "  Down  "
ITEM   4 "   Up   "
ITEM   5 "  Exit  "

**Place**Move**Nudge**Default**
MENU  46
ITEM   0 " Select "
ITEM   1 "  Undo  "
ITEM   2 "  Redo  "
ITEM   3 "  Exit  "

**Place**Move**Nudge**Default**Redo*
MENU  47
ITEM   0 "  Run   "
ITEM   1 "  Skip  "
ITEM   2 "  Back  "
ITEM   3 "  Save  "
ITEM   4 "Restore "
ITEM   5 "  Exit  "

**Place**Rotate*
MENU  48
ITEM   0 "Complete"
ITEM   1 "Rotate90"
ITEM   2 "SetAngle"
ITEM   3 "  Spin  "
ITEM   4 " Window "
ITEM   5 " Expand "
ITEM   6 "Contract"
ITEM   7 "  Exit  "

**Place**Auto*
MENU  49
ITEM   0 " Matrix "
ITEM   1 "Net Attr"
ITEM   2 "ConnBias"
ITEM   3 "Initial "
ITEM   4 "Optimize"
ITEM   5 "Discrete"
ITEM   6 "Len Min "
ITEM   7 "Evaluate"
ITEM   8 " Rename "
ITEM   9 "  Exit  "

**Place**define group*
MENU  50
ITEM   0 " Define "
ITEM   1 " Paste  "
ITEM   2 "  Exit  "

**Place**Group*
MENU  51
ITEM   0 "  Move  "
ITEM   1 "  Copy  "
ITEM   2 " Delete "
ITEM   3 " Rotate "
ITEM   4 "Opposite"
ITEM   5 "  Cut   "
ITEM   6 " Origin "
ITEM   7 "Mod Item"
ITEM   8 "UnRoute "
ITEM   9 "  Exit  "

**Place**group**mod_item*
MENU  52
ITEM   0 "Add Item"
ITEM   1 "Del Item"
ITEM   2 "  Exit  "

**Place**group**unroute*
MENU  53
ITEM   0 " Window "
ITEM   1 "  All   "
ITEM   2 "  Exit  "

**Place**Auto**Matrix*
MENU  54
ITEM   0 " Select "
ITEM   1 "Unselect"
ITEM   2 " Create "
ITEM   3 " Delete "
ITEM   4 "  Move  "
ITEM   5 "DelPoint"
ITEM   6 "  Exit  "

**Place**Auto**Matrix**move*
MENU  55
ITEM   0 "Complete"
ITEM   1 "Opposite"
ITEM   2 " Window "
ITEM   3 " Expand "
ITEM   4 "Contract"
ITEM   5 "  Exit  "

**Place**Auto**ConnBias*
MENU  56
ITEM   0 " Normal "
ITEM   1 " Angled "
ITEM   2 "  Long  "
ITEM   3 "LongAng "
ITEM   4 "  Exit  "

**Place**Auto**optimize*
MENU  57
ITEM   0 "SwapPart"
ITEM   1 "SwapGate"
ITEM   2 "SwapPins"
ITEM   3 "SwapTerm"
ITEM   4 "  Exit  "

**Place**Auto**optimize**select*
MENU  58
ITEM   0 " Manual "
ITEM   1 "  Auto  "
ITEM   2 "  Exit  "

**Place**Auto**Show Plc*
MENU  59
ITEM   0 "Histogrm"
ITEM   1 "Dens Map"
ITEM   2 "Net Len "
ITEM   3 "  Exit  "

**Route**Rut_Conn*
MENU  60
ITEM   0 "Crn/Fin "
ITEM   1 "Del Crn "
ITEM   2 " Angle  "
ITEM   3 " Level  "
ITEM   4 "Add Arc "
ITEM   5 " Follow "
ITEM   6 "Fin Net "
ITEM   7 "EndNoVia"
ITEM   8 "End Via "
ITEM   9 "Complete"
ITEM  10 "Fin Pin "
ITEM  11 "  Exit  "

**Route**Copy_Rut*
MENU  61
ITEM   0 " Select "
ITEM   1 "  Undo  "
ITEM   2 "Last Sel"
ITEM   3 "PlacRout"
ITEM   4 " Repeat "
ITEM   5 "Swap End"
ITEM   6 " Count  "
ITEM   7 "EndNoVia"
ITEM   8 "End Via "
ITEM   9 "  Done  "

**Route**Auto*
MENU  62
ITEM   0 "Interact"
ITEM   1 " Batch  "
ITEM   2 "Strategy"
ITEM   3 "  Exit  "

**Route**Auto**Edit*
MENU  63
ITEM   0 "  Auto  "
ITEM   1 "Steered "
ITEM   2 " Modes  "
ITEM   3 " Modify "
ITEM   4 "UnRoute "
ITEM   5 "ReRoute "
ITEM   6 "  Undo  "
ITEM   7 " Group  "
ITEM   8 "RouteBox"
ITEM   9 "  Exit  "

**Route**Auto**Board*
MENU  64
ITEM   0 " Start  "
ITEM   1 " Resume "
ITEM   2 "  Exit  "

**Route**Auto**Edit**Rt**Box*
MENU  65
ITEM   0 "  Move  "
ITEM   1 "Redefine"
ITEM   2 " Route  "
ITEM   3 "UnRoute "
ITEM   4 " Check  "
ITEM   5 "  Exit  "

**Route**Auto**Edit**Grp*
MENU  66
ITEM   0 " Define "
ITEM   1 "RoutComp"
ITEM   2 " Debug  "
ITEM   3 "  Exit  "

**Route**Auto**Strategy*
MENU  67
ITEM   0 "  Load  "
ITEM   1 "  Save  "
ITEM   2 "  Grid  "
ITEM   3 " Rules  "
ITEM   4 " Manual "
ITEM   5 " Sweep  "
ITEM   6 "  Pass  "
ITEM   7 " Level  "
ITEM   8 "  Nets  "
ITEM   9 "  Exit  "
ITEM  10 "Debug   "
ITEM  11 "Dump    "

**Route**auto**Modify*
MENU  68
ITEM   0 "Complete"
ITEM   1 "Move Crn"
ITEM   2 "Cut Seg "
ITEM   3 " Level  "
ITEM   4 "Del Seg "
ITEM   5 "ReRoute "
ITEM   6 "  Undo  "
ITEM   7 "  Exit  "

**Route**auto**Mode*
MENU  69
ITEM   0 "  Auto  "
ITEM   1 " No Via "
ITEM   2 "Latched "
ITEM   3 " Manual "
ITEM   4 "Gridless"
ITEM   5 " Shove  "
ITEM   6 "  Exit  "

**Route**auto**Modify nets*
MENU  70
ITEM   0 " Select "
ITEM   1 "Unroute "
ITEM   2 "Unr Ulck"
ITEM   3 "Unr CPrt"
ITEM   4 "Unr Prtl"
ITEM   5 "Del Tack"
ITEM   6 "  Lock  "
ITEM   7 " Unlock "
ITEM   8 "  Exit  "

**Route**auto**Move*
MENU  71
ITEM   0 "Crn/Fin "
ITEM   1 "Swap End"
ITEM   2 "Lock Crn"
ITEM   3 " Level  "
ITEM   4 "  Mode  "
ITEM   5 "  Undo  "
ITEM   6 "End Via "
ITEM   7 "EndNoVia"
ITEM   8 "Complete"
ITEM   9 "  Exit  "

**Route**Modify*
MENU  72
ITEM   0 "Move Crn"
ITEM   1 "Move Seg"
ITEM   2 "Cut Seg "
ITEM   3 "Add Crn "
ITEM   4 "Del Crn "
ITEM   5 "Via/Wid "
ITEM   6 "MitreCrn"
ITEM   7 " Level  "
ITEM   8 "UnRoute "
ITEM   9 "  Exit  "

**Route**Modify**Move_Crn*
MENU  73
ITEM   0 "Complete"
ITEM   1 " Angle  "
ITEM   2 " Orthog "
ITEM   3 " Radius "
ITEM   4 "CvtToArc"
ITEM   5 " Window "
ITEM   6 " Expand "
ITEM   7 "Contract"
ITEM   8 "  Exit  "

**Route**Modify**Move_Seg*
MENU  74
ITEM   0 "Complete"
ITEM   1 " Angle  "
ITEM   2 " Orthog "
ITEM   3 " Window "
ITEM   4 " Expand "
ITEM   5 "Contract"
ITEM   6 "  Exit  "

**Route**Modify**Cut_Seg*
MENU  75
ITEM   0 "Complete"
ITEM   1 " Angle  "
ITEM   2 " Orthog "
ITEM   3 "Swap Crn"
ITEM   4 " Window "
ITEM   5 " Expand "
ITEM   6 "Contract"
ITEM   7 "  Exit  "

**Route**Modify**Add_Crn*
MENU  76
ITEM   0 "Complete"
ITEM   1 "CvtToArc"
ITEM   2 " Window "
ITEM   3 " Expand "
ITEM   4 "Contract"
ITEM   5 "  Exit  "

**Route**Modify**Via/LWid*
MENU  77
ITEM   0 "Via Type"
ITEM   1 " Width  "
ITEM   2 "  Exit  "

**Route**Modify**Mit_Crn*
MENU  78
ITEM   0 "Current "
ITEM   1 "   Up   "
ITEM   2 "  Down  "
ITEM   3 "Paramtrs"
ITEM   4 "  Exit  "

**Route**Modify**UnRoute* + *Route**UnRoute* + *Route**Len_Of*
MENU  79
ITEM   0 " Route  "
ITEM   1 "Segment "
ITEM   2 "  Net   "
ITEM   3 "Net Name"
ITEM   4 "  Exit  "

**Check**EDC*
MENU  80
ITEM   0 "  Exit  "
ITEM   1 "  PCB   "
ITEM   2 "  Task  "
ITEM   3 "Aggress "
ITEM   4 " Rules  "
ITEM   5 " Setup  "
ITEM   6 "Save Set"
ITEM   7 "Read Set"
ITEM   8 " Check  "
ITEM   9 " Select "
ITEM  10 "Add Item"
ITEM  11 "Del Item"
ITEM  12 "Add Cls "
ITEM  13 "Del Cls "
ITEM  14 "Mask All"
ITEM  15 "Mask Cls"
ITEM  16 "Mask Net"
ITEM  17 "   TM   "

**Check**EDC**check*
MENU  81
ITEM   0 "  Exit  "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 " Detail "
ITEM   4 "  Next  "
ITEM   5 "  Line  "
ITEM   6 "  Parl  "
ITEM   7 " Daisy  "
ITEM   8 " Filter "
ITEM   9 "   All  "

**Check**EDC*form
MENU  82
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Mask All"
ITEM   4 "Mask Net"
ITEM   5 "Mask Cls"
ITEM   6 "Add Item"
ITEM   7 "Del Item"
ITEM   8 "  Exit  "
ITEM   9 "Justify "
ITEM  10 "Disable "

**Check**EDC**TM*
MENU  83
ITEM   0 "  Exit  "
ITEM   1 "   Go   "
ITEM   2 " Summary"
ITEM   3 "  Calc  "
ITEM   4 " Colors "
ITEM   5 " Pulse  "
ITEM   6 " Windows"
ITEM   7 "  PCB   "
ITEM   8 " Select "
ITEM   9 "Read IV "
ITEM  10 "Save IV "
ITEM  11 "Edit IV "
ITEM  12 " Del IV "
ITEM  13 " New IV "
ITEM  14 "Add Crn "
ITEM  15 "Del Crn "
ITEM  16 "Move Crn"
ITEM  17 " Select "
ITEM  18 "KeyBoard"
ITEM  19 "LoadTask"
ITEM  20 "SaveTask"
ITEM  21 "Del Task"

**CAM**Devices Menu*
MENU  84
ITEM   0 " Matrix "
ITEM   1 " Laser  "
ITEM   2 "Pen Plot"
ITEM   3 "PhotoPlt"
ITEM   4 "  Exit  "

** RT_AUTO_STRAT_DEBUG (DEBUG only, no translation needed) **
MENU  85
ITEM   0 "Dbg_Mode"
ITEM   1 "Pix_Used"
ITEM   2 "Pix_Map "
ITEM   3 "Pix_Via "
ITEM   4 " Exit   "

**Setup**Net-Attr**
MENU  86
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Justify "
ITEM   4 "RouteOpt"
ITEM   5 "  Add   "
ITEM   6 " Delete "
ITEM   7 " Exit   "

**Route**Auto**Edit**Grp**Ops*
MENU  87
ITEM   0 " Route  "
ITEM   1 "Unroute "
ITEM   2 "LockCrns"
ITEM   3 "UnlkCrns"
ITEM   4 "  Exit  "

**Route**SuprRout*
MENU  88
ITEM   0 "  Load  "
ITEM   1 "Strategy"
ITEM   2 "Net Attr"
ITEM   3 "Paramtrs"
ITEM   4 "Read Wid"
ITEM   5 "  Exit  "

**SuperRouter**SR_ROUTE_MENU*
MENU  89
ITEM   0 "  All   "
ITEM   1 "Initial "
ITEM   2 " Ripup  "
ITEM   3 "Optimize"
ITEM   4 " Speed  "
ITEM   5 "Strategy"
ITEM   6 "Display "
ITEM   7 "Net Attr"
ITEM   8 "  Stop  "
ITEM   9 "  Exit  "

**SuperRouter**SR_STRATEGY_MENU*
MENU  90
ITEM   0 "  Load  "
ITEM   1 "  Save  "
ITEM   2 "  Edit  "
ITEM   3 "  Exit  "

**SuperRouter**SR_ROUTE_SPEED_MENU*
MENU  91
ITEM   0 "RipSpeed"
ITEM   1 "OptSpeed"
ITEM   2 "  Exit  "

**Generic Forms Menu*
MENU  92
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Complete"
ITEM   4 "  Exit  "

**CAM**Defaults Menu*
MENU  93
ITEM   0 "General "
ITEM   1 " Drill  "
ITEM   2 "Drill FS"
ITEM   3 "Aperture"
ITEM   4 "  Misc  "
ITEM   5 "  Exit  "

**CAM**Batch Menu*
MENU  94
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 " Cancel "
ITEM   4 " Accept "
ITEM   5 "  Exit  "

**CAM**Drill Menu*
MENU  95
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "NewDrill"
ITEM   4 "StartDrl"
ITEM   5 " Update "
ITEM   6 "  Exit  "

**CAM**Plot Menu*
MENU  96
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "New Plot"
ITEM   4 "StartPlt"
ITEM   5 " Update "
ITEM   6 "PrevMenu"
ITEM   7 "NextMenu"
ITEM   8 "  Exit  "

**Route**Auto Strat Pass Menu*
MENU  97
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Dispers "
ITEM   4 "  Exit  "

**Setup**Lib Path Menu*
MENU  98
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Add Lib "
ITEM   4 "Del Lib "
ITEM   5 "Complete"
ITEM   6 "  Exit  "

**Setup*PadStack*Vias*
MENU  99
ITEM   0 " Select "
ITEM   1 "Page Up "
ITEM   2 "PageDown"
ITEM   3 "Add Via "
ITEM   4 "Del Via "
ITEM   5 "PurgeVia"
ITEM   6 "Add Lvl "
ITEM   7 "Del Lvl "
ITEM   8 "Complete"
ITEM   9 "  Exit  "

**Inout*IntrFace*
MENU  100
ITEM   0 "Redac In"
ITEM   1 "SchemaIn"
ITEM   2 "FutNetIn"
ITEM   3 "ToForce "
ITEM   4 "FrmForce"
ITEM   5 "CamPlus "
ITEM   6 "  Exit  "

**CAM**Printers*
MENU  101
ITEM   0 " Matrix "
ITEM   1 " Laser  "
ITEM   2 " Windows"
ITEM   3 "  Exit  "

**CAM**Verify*
MENU  102
ITEM   0 "Pen Plot"
ITEM   1 " Matrix "
ITEM   2 " Laser  "
ITEM   3 " Windows"
ITEM   4 "  Exit  "

**ShareWare**File popup*
MENU  103
ITEM   0 "Continue"
ITEM   1 " Abort  "
END MENU

SECTION STRING

** mitre table strings **
ITEM   0 " Mitre Data"
ITEM   1 "Level Ratio"
ITEM   2 "           "
** unix specific strings **
ITEM   3 "Top Level"
ITEM   4 "Ok"
ITEM   5 "Cancel"
ITEM   6 "Quit"
ITEM   7 "Default"
ITEM   8 "Text Input"
ITEM   9 "Complete"
ITEM  10 "Palette"
ITEM  11 "Data Types"
ITEM  12 "Passes"
ITEM  13 "Page Up"
ITEM  14 "Page Down"
ITEM  15 "Files"
** setup strings **
ITEM  16 "Set Display Colors"
ITEM  17 "Conns"
ITEM  18 "Foreground"
ITEM  19 "Background"
ITEM  20 "Lines"
ITEM  21 "Text"
ITEM  22 "Tracks"
ITEM  23 "Copper"
ITEM  24 "Pads"
ITEM  25 "Vias"
ITEM  26 "Errors"
ITEM  27 "Top"
ITEM  28 "Bottom"
ITEM  29 "Part Name"
ITEM  30 "Part Type"
ITEM  31 "Yes"
ITEM  32 "No"
** mgpalette strings **
ITEM  33 "Modify Color Palette"
ITEM  34 "Apply"
ITEM  35 "Revert"
ITEM  36 "Save"
ITEM  37 "Tile Selected:"
ITEM  38 "Hue:"
ITEM  39 "Tone:"
ITEM  40 "Intensity:"
ITEM  41 "Brightness:"
ITEM  42 "Red"
ITEM  43 "Yellow"
ITEM  44 "Green"
ITEM  45 "Cyan"
ITEM  46 "Blue"
ITEM  47 "Magenta"
ITEM  48 "None"
ITEM  49 "Deep"
ITEM  50 "Dark"
ITEM  51 "Bright"
** info window **
ITEM  52 "Grid%8s"
ITEM  53 "Wid %8s"
ITEM  54 "Level   %4ld"
ITEM  55 "T H %8s"
ITEM  56 "T W %8s"
ITEM  57 "Millimeters "
ITEM  58 "Thous/inch  "
ITEM  59 "Inches      "
ITEM  60 "PL %2d %2d V %c"
** ascii out **
ITEM  61 "  PCB  "
ITEM  62 "MATRIX "
ITEM  63 " TEXT  "
ITEM  64 " LINES "
ITEM  65 " DECAL "
ITEM  66 " PTYPE "
ITEM  67 "  PART "
ITEM  68 "  CONN "
ITEM  69 " TRACK "
ITEM  70 "  POUR "
ITEM  71 "  MISC "
ITEM  72 "  ALL  "
ITEM  73 "       "
** file window **
ITEM  74 " << More >> "
ITEM  75 " Directory  "
** setup display **
ITEM  76 "Lines"
ITEM  77 "Text"
ITEM  78 "Copper"
ITEM  79 "Pads"
ITEM  80 "Tracks"
ITEM  81 "Vias"
ITEM  82 "Errors"
ITEM  83 "Top"
ITEM  84 "Bottom"
ITEM  85 "Part Name"
ITEM  86 "Part Type"
ITEM  87 "Conns"
ITEM  88 "ForGnd"
ITEM  89 "BakGnd"
** setup param strings **
ITEM  90 "Copper Hatch"
ITEM  91 "Decal Hatch"
** form **
ITEM  92 "   << More >>"
** cam **
ITEM  93 "  Update"
**check**
ITEM  94 "[  Setup   ]"
ITEM  95 "--Checking--"
ITEM  96 "layer %2d"
ITEM  97 "[ Building ]"
ITEM  98 "[ Sorting  ]"
ITEM  99 "[ Scanning ]"
ITEM 100 " Components "
ITEM 101 "    Nets    "
ITEM 102 "Spacing:%4s"
ITEM 103 "Errors:    0"
ITEM 104 "Drills:%5d"
ITEM 105 "Errors:%5d"
** default decal name **
ITEM 106 "test"
** edc strings**
ITEM 107 "PCB Parameters"
ITEM 108 "Layer Number:"
ITEM 109 "Layer Distance:"
ITEM 110 "Copper High:"
ITEM 111 "Dielectric Constant:"
ITEM 112 "Layer     Level     Attr"
ITEM 113 "Options"
ITEM 114 "Delay (Imp,Cap) Violations:"
ITEM 115 "Parallelism     Violations:"
ITEM 116 "Daisy Chain     Violations:"
ITEM 117 "Delay (Imp,Cap) Output:"
ITEM 118 "Parallelism     Output:"
ITEM 119 "Daisy Chain     Output:"
ITEM 120 "Output Segment Coordinates"
ITEM 121 "Output Only Violated Segments"
ITEM 122 "Search Distance for Parallelism:"
ITEM 123 "Calculations:"
ITEM 124 "Signals"
ITEM 125 "Stubs"
ITEM 126 "Connections"
ITEM 127 "Routes"
ITEM 128 "Route To Route"
ITEM 129 "Copper"
ITEM 130 "InterLayer"
ITEM 131 "Search Distance for Parallelism"
ITEM 132 "Task List"
ITEM 133 "Capacitance"
ITEM 134 "Length"
ITEM 135 "Delay"
ITEM 136 "Impedance"
ITEM 137 "Parallelism"
ITEM 138 "Stub Length"
ITEM 139 "True Length"
ITEM 140 "Cycles"
ITEM 141 "Cycles In Pro"
ITEM 142 "Aggressor List"
ITEM 143 "Include"
ITEM 144 "Remove"
ITEM 145 "Signal Requirements:"
ITEM 146 "Max Length:"
ITEM 147 "Min and Max Delay (psec):"
ITEM 148 "Max Number of Corners:"
ITEM 149 "Stub Interval:"
ITEM 150 "Sum Length of Routes:"
ITEM 151 "Min and Max Capacitance (pf):"
ITEM 152 "Min and Max Impeadance (ohm):"
ITEM 153 "Max Overlap:"
ITEM 154 "End of Parameters"
ITEM 155 "Deleting"
** gate and pin swapping **
ITEM 156 "---Setup----"
ITEM 157 "--Swapping--"
ITEM 158 "--- Pin 1 ---"
ITEM 159 "--- Pin 2 ---"
ITEM 160 "--- Gate 1 ---"
ITEM 161 "--- Gate 2 ---"
ITEM 162 "Working ..."
ITEM 163 "Arc   Corner"
ITEM 164 "Adj Arc   ON"
ITEM 165 "Adj Arc  OFF"
ITEM 166 "Mitre  Lev %1d"
ITEM 167 "Corner Lev %1d"
ITEM 168 "No Decal"
ITEM 169 "Pour Hatch"
ITEM 170 "Database"
ITEM 171 " Backing Up "
ITEM 172 "    Job     "
** routing mode **
ITEM 173 "Auto       "
ITEM 174 "No Via     "
ITEM 175 "Latched    "
ITEM 176 "Manual     "
ITEM 177 "Gridless   "
ITEM 178 "Shove      "
** copper pour **
ITEM 179 "Level   %4d"
ITEM 180 "Polygon %4d"
ITEM 181 "Errors  %4d"
ITEM 182 "Seg%9d"
ITEM 183 "[ Building ]"
ITEM 184 "[ Scanning ]"
ITEM 185 "[Connecting]"
ITEM 186 "[  Output  ]"
ITEM 187 "[V-Hatching]"
ITEM 188 "[  Smooth  ]"
ITEM 189 "[F-Hatchdir]"
ITEM 190 "[S-Hatchdir]"
ITEM 191 "[Segsorting]"
ITEM 192 "[Memory Mng]"
ITEM 193 "[ Distance ]"
ITEM 194 "            "

** setup net attribute "ALL" spec WARNING: must match "ALL" in "pcbattr.frm" **
ITEM 195 "ALL"
ITEM 196 "Working%5d"

** SuperRouter **
ITEM 197 "RF  "
ITEM 198 "RS  "
ITEM 199 "  Ripup     "
ITEM 200 "  Init      "
ITEM 201 "# vias :%4d"
ITEM 202 "%-6d:%5d"
ITEM 203 "%% done :%2.1lf"
ITEM 204 "%% done :%4d"
ITEM 205 "Opt fast %3d"
ITEM 206 "Opt slow %3d"
ITEM 207 "OF  L%3d"
ITEM 208 "OS  L%3d"
ITEM 209 "Via %8s"
ITEM 210 "Via %c%7s"
ITEM 211 "Via%c%8s"
ITEM 212 "Offgrid%5d"
ITEM 213 "BackupHrs %2d"
ITEM 214 "NxtBak %5s"
ITEM 215 "Time %7s"
ITEM 216 "  Loading:  "
ITEM 217 "   Grid     "
ITEM 218 "   Board    "
ITEM 219 " Padstacks  "
ITEM 220 "   Vias     "
ITEM 221 "   Pins     "
ITEM 222 "  Coppers   "
ITEM 223 "Connections "
ITEM 224 " Pre-routes "


END STRING


SECTION TOGGLE

TOGGLE   0
ITEM     0 "No "
ITEM     1 "Yes"

TOGGLE   1
ITEM     0 "Yes"
ITEM     1 "No "

TOGGLE   2
ITEM     0 "Off"
ITEM     1 "On "

TOGGLE   3
ITEM     0 "Off"
ITEM     1 "On "
ITEM     2 "PR1"
ITEM     3 "PR2"

TOGGLE   4
ITEM     0 "Horz"
ITEM     1 "Vert"
ITEM     2 "Min "
ITEM     3 "ECL1"
ITEM     4 "ECL2"
ITEM     5 "Off "

TOGGLE   5
ITEM     0 "Low "
ITEM     1 "High"

TOGGLE   6
ITEM     0 "Normal"
ITEM     1 "No Hatch"
ITEM     2 "See Thru"

TOGGLE   7
ITEM     0 "H/V"
ITEM     1 "Diag"

TOGGLE   8
ITEM     0 "Mils"
ITEM     1 "Metric"
ITEM     2 "Inches"

TOGGLE   9
ITEM     0 "Line"
ITEM     1 "Arc"

TOGGLE  10
ITEM     0 "None"
ITEM     1 "Horz"
ITEM     2 "Vert"
ITEM     3 "Any"

** cam plot rotation **
TOGGLE  11
ITEM     0 "0  "
ITEM     1 "90 "
ITEM     2 "180"
ITEM     3 "270"

** cam plot quality **
TOGGLE  12
ITEM     0 "Check Plot"
ITEM     1 "Artwork   "

** cam plot location **
TOGGLE  13
ITEM     0 "Centered"
ITEM     1 "Bottom-Left Margin"
ITEM     2 "Bottom-Right Margin"
ITEM     3 "Top-Left Margin"
ITEM     4 "Top-Right Margin"
ITEM     5 "Origin Offset"

** cam pad type **
TOGGLE  14
ITEM     0 "LINE"
ITEM     1 "SQRL"
ITEM     2 "OVAL"
ITEM     3 "RECT"
ITEM     4 "RND"
ITEM     5 "SQR"
ITEM     6 "ANNL"
ITEM     7 "THER"
ITEM     8 "ODD"

** cam unit type **
TOGGLE  15
ITEM     0 "English"
ITEM     1 "Metric"

** cam zero suppress **
TOGGLE  16
ITEM     0 "None"
ITEM     1 "Leading"
ITEM     2 "Trailing"

** cam coordinate type **
TOGGLE  17
ITEM     0 "Absolute"
ITEM     1 "Incremental"

** cam circular interpolation **
TOGGLE  18
ITEM     0 "None"
ITEM     1 "Quadrant"
ITEM     2 "Full"

** edc aggressor **
TOGGLE  19
ITEM     0 "   "
ITEM     1 " X "

** edc attribute **
TOGGLE  20
ITEM     0 "SIG"
ITEM     1 "PLN"

** edc plv + plo**
TOGGLE  21
ITEM     0 "Net"
ITEM     1 "Segment"
ITEM     2 "None"

** edc lpv + lpo**
TOGGLE  22
ITEM     0 "Net"
ITEM     1 "Connection"
ITEM     2 "Segment"

** edc dso **
TOGGLE  23
ITEM     0 "Stub"
ITEM     1 "Connection"
ITEM     2 "Segment"
ITEM     3 "None"

** powerroute direction **
TOGGLE  24
ITEM     0 "Horizontal"
ITEM     1 "Any"
ITEM     2 "Vertical"

** powerroute pass type **
TOGGLE  25
ITEM     0 "Heuristics"
ITEM     1 "Maze"
ITEM     2 "Reroute"
ITEM     3 "Dispersion"
ITEM     4 "Via Reduce"
ITEM     5 "Auto CDE"

** powerroute sweep direction **
TOGGLE  26
ITEM     0 "Up-Left"
ITEM     1 "Up-Right"
ITEM     2 "Down-Left"
ITEM     3 "Down-Right"
ITEM     4 "Right-Up"
ITEM     5 "Right-Down"
ITEM     6 "Left-Up"
ITEM     7 "Left-Down"
ITEM     8 "Next Conn"

** powerroute 45 degree routing **
TOGGLE  27
ITEM     0 "On"
ITEM     1 "Off"
ITEM     2 "Max"

** cam back-off option **
TOGGLE  28
ITEM     0 "Annular"
ITEM     1 "None"
ITEM     2 "All"

** autoRoute route priority option **
TOGGLE  29
ITEM     0 "Low"
ITEM     1 "Med Low"
ITEM     2 "Std"
ITEM     3 "Med High"
ITEM     4 "High"

** autoRoute route via location **
TOGGLE  30
ITEM     0 "Inside"
ITEM     1 "Outside"
ITEM     2 "Both"

** autoRoute route via type **
TOGGLE  31
ITEM     0 "Default"
ITEM     1 "Standard"
ITEM     2 "Buried"
ITEM     3 "Micro"

** SR via mode option **
TOGGLE  32
ITEM     0 "Standard"
ITEM     1 "Micro   "
ITEM     2 "None    "


** EDC Task Mask Toggle **
TOGGLE  33
ITEM     0 "   "
ITEM     1 " X "

** EDC Filter Toggle **
TOGGLE  34
ITEM     0 "Violations Only"
ITEM     1 "All Items"

** EDC Device Toggle **
TOGGLE  35
ITEM     0 "Display"
ITEM     1 "Disk File"
** ITEM     2 "Printer"

** Setup Pads Toggle **
TOGGLE  36
ITEM     0 "Oval"
ITEM     1 "Rect"
ITEM     2 "Rnd"
ITEM     3 "Sqr"
ITEM     4 "Annl"
ITEM     5 "Odd"

** Thermal Directions Toggle **
TOGGLE  37
ITEM     0 "x"
ITEM     1 "+"

END TOGGLE


SECTION KEYBOARD

ITEM   0 "Y"       **yes**
ITEM   1 "N"       **no**
ITEM   2 "A"       **macro yes/no mode Ask**
ITEM   3 "M"       **macro yes/no mode Macro**
ITEM   4 "R"       **macro yes/no mode Restore**

END KEYBOARD